例句與造句

1. This last requirement applies only to 10BASE5 and 10BASE2 Ethernet segments.
2. With bridging, only well-formed Ethernet packets are forwarded from one Ethernet segment to another; collisions and packet errors are isolated.
3. Each subnet is served by a designated default router, but may consist internally of multiple physical Ethernet segments interconnected by network switches or network bridges.
4. The rule only applies to shared-access 10 Mbit / s Ethernet segments connected by repeaters or repeater hubs ( collisions domains ) and FOIRL links.
5. Historically, depending on the type of Ethernet framing that was in use on an Ethernet segment, both interpretations were simultaneously valid, leading to potential ambiguity.
6. It's difficult to find ethernet segment in a sentence. 用ethernet segment造句挺難的
7. For this reason it is often desirable to have heartbeat running over more than one transport; for instance, an Ethernet segment using IP, and a serial link.
8. The system is made up of 3Com's SuperStack II Switch 9300 which serves as the backbone supporting seven collapsed Gigabit Ethernet segments and servers that are integrated with 3Com's CoreBuilder 7000HD Asynchronous Transfer Mode ( ATM ) connectivity.
9. In order to allow some frames using Ethernet v2 framing and some using the original version of 802.3 framing to be used on the same Ethernet segment, EtherType values must be greater than or equal to 1536 ( 0x0600 ).
10. While a simple passive wire is highly reliable for small networks, it is not reliable for large extended networks, where damage to the wire in a single place, or a single bad connector, can make the whole Ethernet segment unusable.
11. In order to allow Ethernet II and IEEE 802.3 framing to be used on the same Ethernet segment, a unifying standard, IEEE 802.3x-1997, was introduced that required that EtherType values be greater than or equal to 1536.
12. All of the base stations in a wireless network should be set to the same SSID ( which must be unique to all other networks within range ) and plugged into the same logical Ethernet segment ( one or more hubs or switches directly connected without IP routers ).